TOP

1. Locate Hollyland microphone case.
2. Plug receiver into USB-C port on PC. NOTE: Unless there's a USB-C extension cable, this requires removing the USB hub into which my keyboard is plugged into.
3. Don the microphone.
4. Launch OBS on laptop monitor.
5. Configure OBS to record into desired target directory for the episode. (Settings >> Output >> Recording Path) Of course, make sure directory exists first!
6. Make sure microphone is enabled, and record a quick test video to confirm it is working and that levels are good.
7. Delete test recording. Fix issues before continuing if required.
8. Set terminal font to system standard font:
   1. Select Edit >> Preferences menu
   2. Select "Pop" under profiles.
   3. Turn OFF Custom Font.
   4. Click Close.
9. Zoom in 3 steps (CTRL-+ three times).
10. Back in OBS, make sure "Video Capture Device (VBL2)" is turned off.
11. Make sure "Screen Capture (XSHM)" is turned off.
12. Make sure "Screen Capture (XSHM) 2" is turned ON. <- This should give a view of your terminal on monitor 2.
13. Bring up your coding session in the console.

1. In OBS, click on Stop Recording (if still recording).
2. In console, zoom back to normal size (CTRL-0).
3. Set terminal font to my custom font:
   1. Select Edit >> Preferences menu
   2. Select "Pop" under profiles
   3. Turn ON Custom Font.
   4. Click Close.
4. Rename .mkv file in Rox Filer if required.
5. Restore microphone equipment into their charging cases.